Iron Cycles has blog has moved!

You should be automatically redirected in 4 seconds. If not, visit
http://www.ironcycles.com/blog/
and update your bookmarks.

Showing posts with label XT. Show all posts
Showing posts with label XT. Show all posts

Saturday, July 21, 2012

Independent Fabrication Delux Redux

This is one I've been waiting on for a bit.  While I love following the technological advances in carbon happening now, not the least of which is the Felt Nine FRD I covered here, there's something so incredibly awesome about a retro-modern steel 29er.

After I met Gary Smith of IF, I became even more smitten with their bikes.  He was kind enough to help me out with getting me a Cross Jester last fall, has set us up with the first SSR Maxx available to the public, and an incredible Ti Factory Lightweight just to name a few.

But when Gary started teasing info on the Delux Redux I knew he was doing something a little different but a whole lot the same.  The details are just now rolling out in full, but a steel frame, an Ingleheart segmented fork, full Shimano XT, and handbuilt wheels by Luxe Wheelworks.  Go for El Fabuloso and you also get one-off purple anno Chris King parts!

Just a few of my favorite shots follow, but if you want one you'd better act fast.  These are limited to 12 of each color!







Tuesday, June 26, 2012

NEW BIKE DAY! Niner Air9 with Shimano XT

This is starting to become a recurring theme around the shop, and I couldn't be happier.  Niner bikes have been rolling out of the shop with regularity and each one keeps getting better.

For this build we went to our go-to component gruppo, Shimano XT.  Performance, looks, and weight, XT has it going on.  It's not quite as light as some of the other gruppos on the market, but with brakes that cannot be matched and smooth shifting as good or better than anything else available, a price that's perfectly competitive, and good looks to match, it's the gruppo we've used as our standard to which other gruppos are measured.



Beautiful build, eh?  The white/raw color combo on the new Air9 PF30 is incredible and really draws a lot of attention.  No denying this thing looks good.


NoTubes Arch EX stock wheelset is a great value and adds a great amount of stiffness over the Crest wheelset while being only slightly heavier.  The big bonus: NoTubes has the best bead hook out there allowing just about any tire to be easily set up tubeless.


The Rock Shox SID fork used on this bike isn't the high-zoot XX World Cup version we've been using so much lately.  This SID RL still has very smooth travel, uncompromising light weight, and looks great with this frame.


Sag measurements printed on the stanchions make setup easier than any fork out there.



XT cranks have legendary Shimano front shifting.  Also legendary from Shimano is not being the lightest, but not sacrificing stiffness to anyone.


Shimano XT brakes have more power and better lever feel than any brake on the market today.  They aren't the lightest, but they do perform the best.




Shimano ICE Technology rotors keep things cool and performance fade-free no matter how you ride.




Looks are personal, but damn these levers sure are sexy.  The single-lever braking can't be beat.


No mistaking the model of this frame!  Niner never wants to leave anyone guessing, but most of their graphics tend to be subtle, or at least in small numbers.



Tuesday, June 19, 2012

Lumberjack 100 Follow-up, Part 3

In this installment of my Lumberjack 100 follow-up, I'm going to cover the final bike setup I used.  Having ridden the course last year, I knew it was pretty smooth single track, but last year I didn't even manage 50 miles coming off of a cold.  I decided a hard tail was still the way to go, even though I was spending 8+ hours on the bike.

Looking back, a very efficient full-suspension bike probably would have been a better choice for me, but not by much.  The hard tail offered incredible climbing, but a full-suspension frame would have offered a bit more comfort on the last lap.  I did lose some time on the last lap from cramping legs, so I'm split on whether or not I could have made up for some of that lost time with more comfort.

Regardless, here's the bike from my 2012 Lumberjack 100 campaign:

Niner Air9 Carbon RDO frame, large, licorice.  PressFit 30 carbon bottom bracket, Rock Shox SID XX World Cup fork with 15mm Maxle.  This frame and fork combo is as light and stiff as anyone could hope for right now.


New ENVE 29er XC carbon rims came in slightly lighter than their claimed weight and much stiffer than anyone could have convinced me of.  After getting used to riding light alloy rims built with light spokes, it's amazing how stiff a set of 29er wheels can be when made from carbon.  Sapim CX-Ray spokes were used not because they are bladed, but because they offered the best platform for building and keeping the weight low.


American Classic hubs were chosen for their light weight and adaptability.  These wheels will most likely see some cyclocross duty and the front hub can easily be adapted from 15mm thru axle to a standard QR.


The tires may or may not have been the best choice, but I went with Schwalbe Furious Fred 29x2.0 tires.  They are shockingly light, hundreds of grams lighter than most other 29er tires, and they roll as fast as a CX file tread.  The down side was the low-volume casing which didn't offer the kind of float a 2.1 or 2.25 tire would have given.


Crank Brothers Egg Beater 11 Ti pedals were chosen again for their light weight.  Their ability to clear mud is great in cyclocross, but in a super-dry cross country race that didn't matter at all.


My favorite saddle of all time, but custom.  Fizik's custom program is awesome when you get in on it, it's quick and doesn't add an extraordinary cost to the saddle.  The Aliante has made it's way onto all of my bikes at this point, and even after 8+ hours in the saddle I didn't have a single saddle sore, no numbness at all, and no chafing.


The only cage anyone should trust, a King stainless.  King Ti is a nice touch, but it doesn't save much weight at all and gets really expensive.  The King stainless cage has a classic look and at $20 it has no match.  I've also never lost a single bottle when using one, which is the most important aspect.


Thomson X4 130x-10 stem has made it's way onto a number of my Niner bikes.  Puts me in a riding position I feel powerful and in control of the bike.  I also like knowing that it'll survive any situation I find myself in when on the trail.


Rock Shox has an excellent hydraulic lockout as part of the SID XX line.  I was skeptical at first, wondering why I'd need something other than a cable-actuated lockout, but once I used it I understood.  Smooth, light action to open your fork or lock it out.


Shimano brakes, XT to be specific currently.  They just can't be beat, and I've tried a lot of disc brakes.  Shimano has no equal in power, modulation, or ease of set-up.


Shimano XTR rear derailleur.  After 8+ hours and countless shifts in the sand, it still worked perfectly.  I didn't miss a single shift all day and after a quick wipe-down with a wet rag the derailleur looked brand new.


There you have it, my 2012 Lumberjack 100 race rig.  I'm not sure what 2013 will see me riding, maybe a Jet9 RDO or a Felt Edict 29?  We'll see.  If my fitness comes in better next year than this year, I'll probably go full-suspension.  Use my fitness to get me up the hills and let the extra squish get me downhill faster.  If my fitness comes in the same or less, I'll probably use a hard tail and hope it climbs fast enough to make up for that lack of fitness.

Saturday, June 9, 2012

Recent Niner Builds


Air9 Carbon RDO with Shimano XT/XTR, SID XX World Cup, NoTubes Crest, 
Niner/Thomson cockpit


Air9 Carbon with Shimano XT, SID XX, NoTubes Crest, Niner cockpit


EMD9 with Shimano XT, SID XX World Cup, NoTubes Crest, Niner/Thomson cockpit


EMD9 with Shimano XT, Niner Carbon fork, NoTubes Crest, Niner/Thomson cockpit


Niner Jet9 Carbon RDO with Shimano XT, SID XX World Cup, NoTubes Crest, 
ENVE/Thomson cockpit


Niner Jet9 Carbon RDO with Shimano XT, SID XX World Cup, NoTubes Crest, 
ENVE/Thomson cockpit

Thursday, May 24, 2012

NEW BIKE DAY! Niner Jet9 RDO with Shimano XT

I'll cut to the chase: 23.7 lbs without pedals.  Now, get the details.

Builds like this just don't come along that often.  It's not every day we get to build the dream bike of a seasoned mountain biker.  When we were asked to build a Jet9 RDO, I was nervous.  Back order lists are incredibly long, this one was ordered the first week of December.


Once the frame had been acquired, everything else was easy.  The frame received a SID XX World Cup 100mm fork with a 15mm thru axle and Cane Creek headset.


The build kit was simple: full Shimano XT.  Every time I ride it I become more and more impressed with the quality of the shifts, but more-so the braking.  Best braking I've ever used.



Wheels where another spot where we knew exactly where to go: Stan's NoTubes.  The stock Crest wheelset came to use 30g LIGHTER than advertised and perfectly round and true.


Thomson post and silver stand-in stem to be replaced with the correct size (and color) once the fit is dialed.  EDGE carbon bars, ESI grips, Maxxis Aspen 2.1 tires set up tubeless.