2012 Felt F65x Gravel Grinder

Here's my new pride and joy set up as a road/gravel bike.  There's a ton of clearance front and rear for the "27c" Challenge Parigi-Roubaix tires, though mounted onto ENVE 29 XC rims the tire measures just a hair over 30mm.  One of my favorites about running disc brakes vs. cantilever when your bike is set up like this?  You don't have to be "that" guy showing up to a road ride with cantilever brakes!

What can I say about the new SRAM Red that I haven't said in previous posts?  It's really that good...

American Classic hubs have held up great so far, but with only a few hundred miles I would expect nothing else from them.  Engagement is a little slow compared to King or I9, but they sure are light!

ENVE rims have been spot on, but again only have a few hundred miles.  The internal nipples aren't my favorite since they require removal of the tire and rim tape to true, but I'm hoping a careful build with quality spokes will ensure they stay true for quite some time.

Clearance at the fork is huge even with a tire that measures over 30mm.  Of course, it should be since it's still had clearance with a Clement PDX mounted on a wide rim that was measuring 37mm.

Glamour shot from the rear.  The wheelset really sets this bike apart in my opinion, of course they retail for more than the stock complete bike so they should make a statement!

Hayes CX-5 still don't have a ton of miles on them, but have been a solid choice so far.  Performance is there, though the weight it a little high.  The weight can't be that big of a deal though since they weigh about the same as some Avid BB-7'.

Clearance in the rear is also massive.  Again, we'd expect nothing less since this is designed as a cyclocross bike with a fat smooth tire.

There she sits, I'm a fan.  More to come when the carbon version dubbed the F1x D finally arrives, which will hopefully be later this week.

This Just In: Felt's 2013 Nine Line Up!

In 2005 I decided to give mountain biking a try.  I built my own bike for the experience, but within a handful of rides I realized the bike I built was too small.  When I started the search I was intrigued by 29ers, but at the time there just wasn't much available.  Tire selection was slim, wheel selection was slim, there were only a couple of forks out there to buy.  I made the plunge and picked up a Salsa, and from that day I've never gone back.

29ers offer the ability to roll over objects better than a 26er, they seem to fit me better at 6'1" because I feel like I am sitting "in" the bike rather than "on top" of it, they offer increased traction, etc etc.  But in the last 7 years 29ers have come a long way, rather than being a niche they now dominate the XC market in the midwest, and for good reason.  The frames have gotten lighter and stiffer, the geometry has been dialed to make 29ers more agile, component selection was exploded, the list goes on.

2010 brought a number of new models to market, the first one I was really excited about was the Niner Air9 Carbon.  It offered light weight, incredible stiffness, unmatched (even to today) drivetrain flexibility (single speed, BB30, PressFit30, GXP, BB90, etc), and all of the "new" mountain bike standards like a tapered steerer tube.

For 2012 Niner introduced the Air9 Carbon RDO which was a massaged version of the Air9 Carbon but shaved weight in a number of places for increased performance.

Felt saw what was happening in the market and for 2013 is not just meeting the expectations of XC racers everywhere but introducing a few new things as well.  The flagship Nine FRD frame comes in at a staggering $2900 but offers a claimed weight of 900g for the frame and utilizes TeXtreme carbon borrowed from Formula 1.

Felt was missing the boat with their previous Nine compared to the competition, even though it was a very nice frame.  It's a sell that the old frame didn't have a tapered steerer tube or oversized bottom bracket but still had a price tag rivaling the most expensive frames.

This new FRD frame, at 900g, is going to blow people away.  The best carbon money can buy, the best engineering available to our industry, and Felt has turned their F1 into a mountain bike.  This thing should be a rocket!

Niner carbon hard tail frames only gave me two real headaches: rear mud clearance and cable routing.  If Felt can nail the geometry Niner has gotten so good at, their new frame will kill Niner.  Felt's clearance around their tire is MASSIVE and comes without the "mud shelf" Niner carbon frames have.

Regarding cable routing, mechanics, wrap your head around this: fully lined and guided internal routing for front and rear derailleurs!  You riders may not care about this much, but when I spend an hour routing housing through an Air9 Carbon I tell myself I'll never do it again!  Let's hope this routing is as easy as Felt is making it sound!

I wish I could give you a first-hand ride report.  Our Felt rep said he spent some time on one and the new Nine was good enough to get him to forget he was riding a 29er, which is a huge compliment coming from a die-hard 26er rider.  It's only a matter of time before some of these new Nine frames and bikes are kicking around the store!

More info can be found here and here.

New Build: ENVE XC 29er Carbon Clincher to American Classic Disc Hubs

Everything from basic 26" mountain wheels, bomber touring wheels, and even the occasional carbon mountain race wheelset, we build our fair share of wheels.  There are pros and cons to building wheels on a regular basis.  On the pro side I get to practice and improve my skills routinely.  On the cos side when it comes to building wheels for myself I usually rush through it to get it done.  I have an attitude when building my own wheels akin to stopping when they are "good enough" rather than done right.

This wheelset, after thinking about the components of it for quite some time, needed to be done right.  I don't build a ton of ENVE rims, but so far every one of them has been a pleasure.  They handle very high spoke tension, are perfectly finished inside and out, and are perfectly straight right out of the box.  To be honest, it's almost like cheating they build so nicely.

The rims came in at 379g and 381g, both under the claimed weight of 385g.  I love when manufacturers can actually be honest with their claimed weights.

Internal nipples aren't my favorite in any wheel, but I've grown to like building with them recently.  They offer a very secure connection between themselves and the nipple wrench which all but eliminates any opportunity for rounding a nipple.

Spokes are Sapim CX-Ray, an industry standard.  They are outrageously expensive, but in my opinion well worth it.  A bladed spoke won't offer any aerodynamic benefit on my XC wheelset, but it does allow me to easily hold the spoke straight while building to prevent any spoke wind-up.

Hubs are American Classic Disc.  This is a controversial choice, but not one made without much deliberation.  I would have preferred DT Swiss hubs, but the 240s front 15QR hub doesn't convert to a standard 9mm QR, and I hope to use these wheels for cyclocross, so I needed a hub that's convertible.  In strong contention were Chris King hubs, which are easily converted, but I had a strong ambition to build these wheels at or below 1400g and the King hubs wouldn't allow that.  Here is where the American Classic hubs shine: they are light, really light, and can be converted from 9mm QR to 15QR Maxle in the front, and many different rear axle configurations.  We have a winner.

Front hub came in at 118g, rear at 234g.  Claimed weights were 116g and 225g, front and rear respectively.

Here's the completed wheelset.  So close to managing the 1400g goal, I finished up at 1410g.  There are lighter wheelsets out there, many even cost less, but what those wheelsets really give up are stiffness.  Super-light alloy wheelsets are great to save weight, but those light rims are flexy and prone to denting (so I have found).

NEW BIKE DAY! Niner Jet9 RDO

Out she goes.  Our final in-stock Niner Jet9 RDO.  She's been with us for too long, we've grown attached, but it's time for us to part ways.  Maybe one day I'll find something to take her place, but nothing will ever make me forget her.

She'll enjoy ling rides in the mountains around Fort Collins.  In her true element.

Adieu.

The Weekend Office

This weekend was sweet.  Saturday was a nice day at the shop, steady and smooth.  Everyone working, but under control.  Not so busy that we can't really take care of people the way we want to, yet busy enough to keep us from standing around.

Then came Sunday.  With expected temperatures in the high-90's and a lot of miles to log on the trails, I stocked up with a ton of fluids.  My bike was set to only carry two bottles, but I had two more Iron Cycles bottles as well as 1 liter of water and 32oz of Gatorade in my car.

I set out with Derrick who was riding his new Niner Jet9 RDO.  This was only his second or third ride on it, and having a new baby at home his training has been limited, but once the trails get twisty that dude is fast.  He's been raving about the Jet9 RDO and how fast it is in rough stuff, but watching him carve was impressive.

Within a couple of miles I knew I couldn't take his lines.  My Air9 RDO is sick-fast, but it won't eat up the bumps the same way his Jet9 RDO will, so I have to duck and weave a lot more where Derrick can just point and shoot.

We ran into Ted Burger and David Pilotto about 20 minutes in and did some miles with them.  Cemetary Loop and heading North-East with those guys was a blast.

After we had knocked out an hour, we shot back to the car for more fluid.  We ran into one of Derrick's friends who gave us a nice tour of some new trails I haven't seen before, then we hit Swallow Cliffs.  8 miles of gravel with a few nice climbs.  We hammered those, rode a few more miles, then it was time for Derrick to depart.

Back to the cars and we have over 3 hours done.  I make my way over to Speedway for a refill on water and Gatorade as well as some Gummy-Savers.  I'm feeling not so bad, and head back to the trails.  Another 12-14 miles and it's time to get off the trails.  I start to really feel it on the climbs and catch a glimpse of some goosebumps.  Not good.  Too much heat, and even though I have gotten about 120-140 oz o fluids in, I'm not sure I have gotten enough.

Just shy of 60 total miles, 50 of it on single-track, and I'm cashed.  Here's the cockpit that was staring at me for about 5 hours:

I'm loving this Air9 RDO.  Coming off of the EMD9, the bottom bracket stiffness doesn't seem like a huge jump, but front-end stiffness is noticeably better.  The frame is also significantly lighter, something like 550g lighter (1780g for the EMD9, 1230g for the Air9 RDO, both weights include all hardware).

A real nice, in-depth review is coming sooner rather than later on the Air9 RDO, stay tuned....

NEW BIKE DAY! Niner Jet9 RDO with Shimano XT

I'll cut to the chase: 23.7 lbs without pedals.  Now, get the details.

Builds like this just don't come along that often.  It's not every day we get to build the dream bike of a seasoned mountain biker.  When we were asked to build a Jet9 RDO, I was nervous.  Back order lists are incredibly long, this one was ordered the first week of December.

Once the frame had been acquired, everything else was easy.  The frame received a SID XX World Cup 100mm fork with a 15mm thru axle and Cane Creek headset.

The build kit was simple: full Shimano XT.  Every time I ride it I become more and more impressed with the quality of the shifts, but more-so the braking.  Best braking I've ever used.

Wheels where another spot where we knew exactly where to go: Stan's NoTubes.  The stock Crest wheelset came to use 30g LIGHTER than advertised and perfectly round and true.

Thomson post and silver stand-in stem to be replaced with the correct size (and color) once the fit is dialed.  EDGE carbon bars, ESI grips, Maxxis Aspen 2.1 tires set up tubeless.

First Rides: Schwalbe Rocket Ron 29 x 2.25 EVO Pacestar Tires

This year I've made it a point to try as many new 29er tires as reasonably possible.  When I started with 29ers, I loved the Maxxis CrossMark.  The tread is still really nicely designed, but weights of tires has come down a lot in the last 5 years.  At well over 600g per tire, that weight no longer constitutes a race tire in my opinion.

My search stayed with Maxxis originally, and I fell in love with the Aspen.  It's a fast-rolling tire with more cornering grip than the CrossMark with a weight that's almost 70g lighter than the CrossMark, the Aspen was a big hit.

Of course, since I'm on a roll, there's no need to stop with "good enough".  Being a fan of Schwalbe treads on CX tires, namely my FMB Grippo XL sporting the old Racing Ralph tread, I decided Schwalbe was the company to turn to next.  Their tires aren't cheap, which is why I carefully selected the first Schwalbe tread to try.  The Racing Ralph is ever-popular, but with rain predicted when I was placing the order, I decided on the Rocket Ron.

The Rocket Ron 29 x 2.25 EVO with Pacestar tire is much higher volume than I am used to, measuring 2.22" at the casing and 2.32" at the tread.  Being used to a 2.1" tire, this was a change for me.  The height of the knobs was way out of my normal comfort zone having spent so much time on super-fast-rolling XC race tires, I wasn't sure what to expect.  Claimed weight is 520g per tire, actual weights were 525g and 531g.

When mounting the Rocket Ron on my NoTubes Crest rims, the tires popped immediately into place, formed a great seal, and didn't have any sidewall air leaks.

I don't toss this out there very often, if ever, but this is a "hero" tire.  You may or may not have heard of "hero dirt", the kind of tacky soil that makes anyone corner like a pro.  Well, this tire allows a guy like me to have that connected-to-the-trail feeling I assume XC pros feel every day.  The tire also rolls unnaturally fast, with very little resistance.  I was absolutely stunned at how quickly this tire gets you down a nice trail.

On the flip side, the size and spacing of the knobs made me believe this would make for a good mud tire.  Their first ride was in an XC race that probably shouldn't have even happened because of the trail conditions, but it did.  I assume any tire would have been a disaster, but this tire did disappoint that day.  Since then I've found myself on the trail in a couple of muddy spots and the tire has performed respectably but not incredibly.

The Rocket Ron tread is an aggressive all-conditions XC tire.  In my opinion it's not a mud tire, and it's not the absolute fastest XC race tire.  If you need to choose one tire for all conditions, this one will be tough to beat.

As an aside, I have had a few issues with glass on this tire.  I firmly believe the glass that cut these tires would have cut anything, and I believe I just found myself in some bad conditions, but it should be noted that I did get a few cuts very early on.  The tires did eventually seal  with Stan's NoTubes sealant, but it makes me nervous to be riding a tire with a few big cuts and would really irritate me to have these cuts on a $95 tire (EACH!!) if it were my only set.  Again, I think the glass would have cut any tire, but not every tire is $95.

On Test: 2012 Niner AIR9 Carbon RDO!

We were high on the list for this bike, but since we had the parts and needed only the frame we ended up getting bumped a couple times.  No problems, though, because she's here now and she's beautiful.

Out of the box we weighed everything that was different from the EMD9 this is replacing.  When going from the EMD9 you not only swap to a carbon frame, but the headset is now integrated instead of a Zero Stack pressfit.  Honestly, I dig the pressfit headsets, but it's incredibly easy to change bearings with an integrated headset, so I'm not too broken up about it.  Also, the integrated FSA headset is roughly half the weight of the Cane Creek pressfit that was in the EMD9.

Also different from the EMD9 is the bottom bracket standard.  The EMD9 uses a standard English-threaded bottom bracket where the AIR9 Carbon RDO uses a PressFit30 bottom bracket.  This opens up the possibility to use lighter BB30-compatible cranks and larger tube junctions.

We'll have a first-ride review coming very soon, as well as apples-to-apples weight comparisons and some build notes coming very soon.  Stay tuned....

Coming Soon: Niner Jet9 RDO

Just a teaser, full photos coming once it's complete.  But as a tease, check this out: Licorice Jet9 RDO w/ Fox RP23 Kashima, SID XX World Cup, Shimano XT, NoTubes Crest wheels.  This.  Thing.  Will.  Shred.

Re-build: PowerTap SL+ Disc to Stan's NoTubes Crest 29

This is my personal rear wheel.  The original only lasted a couple of weeks, all due to my impatience.  I made it less than 10 minutes into a trail ride when I hit a piece of glass and cut a roughly 9mm slice in the tire.  When it didn't seal I decided to ride it back to the car flat.  That's when I clipped a rock and dented my rim.

It's held up well with a tube, actually.  But I strongly prefer tubeless, especially with a Stan's rim.  So I ordered a new Crest rim, and re-laced it.  About an hour later I was ready to roll with power on my mountain bike.

The PowerTap SL+ is laced 3x/3x to a NoTubes Crest 29 rim with black DT Swiss Revolution spokes and black DT Swiss ProLoc brass nipples.  The wheel is set up tubeless with Stan's Yellow Tape and ZTR valve.  Tire is a Maxxis Aspen 29x2.1.

2012 Niner EMD9 - 400 miles in

This bike has seen a solid number of miles over the last few weeks.  Commuting miles, plenty of trail miles, lots of gravel.

I love this thing.  Sure, carbon sexiness is still calling my name and really trying to draw me in, but until then I'm sold.  And I'll always hold a place for this alloy EMD9.

Another ride in the books on my 2012 Niner EMD9 ....

Lumberjack is only 8 weeks away at this point, and today wrapped up a pretty big (for me) 3-week training block.  Building from 10-11 hours per week up to a high of about 16 this week, I was lucky enough to get a really nice chunk of those hours on single track.

It's pretty incredible how great the trails are right now, especially Palos.  This time of year we're usually sitting around grumbling about how the trails are closed because they are too wet, but after a few trips to the trails I'm psyched about how dry they are.

This weekend as well as last weekend were about as good as they get, today had only 3-4 spots of mud in the 55-ish miles of trail I traveled.  Anyone who has hit Palos in the spring knows the lack of mud in April is very welcome.

After these three weeks I'm ready for a little time off of the bike.  A couple of rest days thrown in this week, maybe even a massage, will hopefully leave me ready for another big weekend next week.

After about 5 weeks of training on this 2012 Niner EMD9, I'm in love.  While the lust for carbon MAY overtake me before Lumberjack hits, this is the perfect bike to train on.  The least expensive frame in Niner's lineup means I don't have to sweat a dent or scratch the same way an AIR9 Carbon would probably bother me.  It's light enough, it handles very neutral, and is an absolute rocket.

If you want to get into a Niner, or maybe you've been riding a 29er but want to go with something new, this is it.  The EMD9 has a tapered head tube for perfect steering, and comes out of the box finished like all Niners: faced and reamed head tube, faced and chased bottom bracket, and faced disc brake mounts.  This may not mean a ton to you, but it means quality and time savings to me.

Niner has the geometry dialed, their fit and finish is second to none, and their pricing is hard to beat.

OK, enough of the sales pitch.  Go ride your bike.

On test: 2012 Niner EMD9

It's no secret I've been a fan of 29ers for quite some time.  My first one dates back to roughly 2006 with a Salsa Mamasita, and I was instantly in love.  That bike was built with an entry-level REBA, X9, and some cheap wheels.  I can't say I remember for sure, but I'd guess it was north of 27-28 lbs.

29ers have changed quite a bit since then.  I'm still riding alloy, though I've ridden plenty of titanium and carbon since then.  At the end of the day, I have a tough time faulting aluminum for it's killer price point, relatively light weight, durability, and great looks.

For 2012 Niner has updated the EMD9.  It may be their entry-level frame, but the specs are right.  It's ready for a tapered steerer tube, which I took advantage of with a SID XX fork.  The standard 73mm English bottom bracket was a welcome spec as I was planning a the use of Shimano cranks.

Like all other frames from Niner, the EMD9 came out of the box perfectly prepped.  Bottom bracket threads were tapped, the bottom bracket and head tube and rear brake mount had been faced.  All great touches that save us a ton of time.

The finish on the frame is a really nice semi-matte black with white logos.  Totally understated and certainly my style.  Add in a few orange touches and this becomes the perfect Iron Cycles team mountain bike, which would explain the abundance of them on our team.

Specs on this build:

Niner EMD9 frame, black, large
Rock Shox SID XX World Cup tapered fork, 15mm Maxle
Shimano XT drivetrain
Niner RDO carbon seatpost
Thomson Elite X4 130mm x 0* stem
Niner RDO carbon handlebars
Fizik Aliante custom saddle
Stan's NoTubes Crest wheelset, XTR 15mm front hub, PowerTap rear hub
King Cages stainless cages
Maxxis Aspen tires

In the first week of having this bike built, I've logged roughly 8-9 hours on the trails.  Comparing this to the Air9 Carbon I recently rode the EMD9 performed admirably.  The AIR9 Carbon's head tube MAY be a hair stiffer, and the BB junction MAY be a hair stiffer, but in all the EMD9 was right on par with the AIR9 Carbon at roughly 1/3 the price.  The EMD9 does give up to the AIR9 Carbon in the weight department, but this built built to only be 2 lbs heavier with a heavier gruppo on it as well.

One worthwhile upgrade that I can't recommend enough is the 15mm Maxle fork.  Be it a suspension fork or a rigid one, if you have the option to run a 15mm Maxle, DO IT!  The stiffness increase was immediately apparent and totally welcome.  The weight penalty is minimal, and is more than made up for on the first rock garden or errant root you come across.

I plan to put plenty of trail time on this frame and fork, and I'll be sure to report back often on it.  So far, I'm blown away that a frame that retails for $550 can be so good.  Yes, it's aluminum, so it may not be as sexy as the newest carbon offerings.  But the weight is reasonable, the ride quality is great, and the price is nearly impossible to beat.

Time to get out and ride some more....

Niner Jet9 RDO Carbon IN STOCK!

Yes, we have one.  And only one.  It's a large, licorice, Jet9 RDO Carbon.  Don't want to wait months for your own?  Give us a shout.  Orders for other colors or sizes placed now aren't expected to arrive until well into spring.

Best of luck finding another one!

Contact us for pricing....

Niner Carbon Air9 RDO - FIRST!

You may have seen this first on Bikerumor.com, but our order was in first.  Yes, that's right, there's only one shop that can claim getting the first Air9 RDO, and that's us.  A large, licorice version of the complete bike with XTR, American Classic 29 Race wheels, SID World Cup XX fork, and a Niner cockpit.

If you want it, speak up.  Only 50 are being made in the first run and they're all sold.  Demand is expected to be like the Jet9 RDO, which means the wait will be looooong......

Rear brake mount has been moved inside the stays.  This is said to allow Niner to use less material to reinforce the stays, reducing weight.

The CYA bottom bracket system was left behind on this model and instead uses SRAMs PF30 system.  30mm spindles are lighter and stiffer.  The system also allows for a full carbon bottom bracket shell, saving more weight.

Niner has done away with the previous Air9 Carbon cable routing and instead uses a full housing run.  You may not care about this, but I am thrilled.  After having built a dozen or so Air9 Carbon frames, this is HUGE.

This is the color of our forthcoming Air9 RDO, LICORICE!  While the green is something sexy, green just doesn't work for me.  I'd love to see this thing in Tang eventually.